- No products in the cart.
Why buy a tool or piece of equipment you’ll use once a year (or less), have to store, and have to maintain? RENT IT INSTEAD!!!
1.5 hp Electric Sprinkler Compressor
$40.00 – $70.00 Read MoreThis electric compressor runs at 6.2 cfm at 120 psi on dual tanks. It is great for blowing out household sprinkler lines or running most pneumatic tools that require higher cfm. It also comes with a 50′ air hose.
Ball Joint Separator
$6.95 – $9.95 Read MoreA ball joint separator is used to separate the ball joint from the spindle support arm. Having the right tool makes any job easier!
Ball Joint U Joint Press
$10.95 – $17.95 Read MoreA ball joint u joint press is used to press the ball joint and the u joint into place. This tool can also be used to change ball joints without removing the control arm from the vehicle.
Bolt Cutter 24″
$8.95 – $12.95 Read MoreUse a bolt cutter for cutting standard padlocks, chains, bolts, and more. This bolt cutter is great for cutting standard padlocks.
Bottle Jack 12 Ton Hydraulic
$15.95 – $95.95 Read MoreThis is a general purpose 12 ton bottle jack. A bottle jack is mounted vertically, and their design allows them to lift more weight higher. Getting the job done is always easier when you have the right tool!
Brake Spring Pliers
$6.95 – $9.95 Read MoreBrake spring pliers are used to help in the removal of brake springs. Getting the job done is a lot easier when you have the right tool!
Clutch Alignment Tool
$6.95 – $9.95 Read MoreThe clutch alignment tool is available in standard or metric. Getting the job done is a lot easier with the right tool!
Come-Along
$15.95 – $23.95 Read MoreThis come-along has a 2 ton capacity on a single line. The cable can be doubled up to achieve a 4 ton capacity. Getting the job done is a lot easier when you have the right tool!
Compressor, 1.5 hp Electric
$19.95 – $110.95 Read MoreThis compressor runs at 3.6 cfm at 100 psi on dual tanks, is great for most pneumatic tools, and comes with a 50′ air hose. This compressor can also be used to fill balloons quickly as a cheap alternative to helium. With this compressor you can have 2 people filling 2 balloons at the same time! We provide the proper filling nozzle for balloons if needed. This item requires a standard 110v power supply.
Compressor, 2.75 hp Electric
$21.95 – $120.95 Read MoreThis compressor runs at 4.5 cfm at 100 psi on dual tanks, has two quick couplers so that two tools can be used at once, is great for most pneumatic tools, and comes with a 50′ air hose. This compressor can also be used to fill balloons quickly as a cheap alternative to helium. With this compressor you can have 2 people filling 2 balloons at the same time! We provide the proper filling nozzle for balloons if needed. This item requires a standard 110v power supply.
Compressor, 5 hp Gas
$40.00 – $70.00 Read MoreThis gas compressor runs at 6.2 cfm up to 120 psi on dual tanks. This gas compressor is great for blowing out household sprinkler lines or running most pneumatic tools that require higher cfm. The gas compressor comes with a 50′ air hose. All of our gas driven equipment comes to you full of gas and does not need to be refilled before return.
Depth Micrometer
$8.95 – $12.95 Read MoreThis depth micrometer is a precision measuring tool that will measure up to 3″ inside depth. A depth micrometer is used to measure the depth of holes, slots, or recesses.
Dial Test Indicator
$10.95 – $19.95 Read MoreA dial test indicator provides precise measurements of short distances to detect deviations from tolerance limits. It will also detect variations in flatness and height from one object to another.
Disc Grinder 4″
$13.95 – $54.95 Read MoreA disc grinder can be used for grinding or cutting various metals. This tool does not come with the cutting or grinding discs. We offer hearing and eye protection at no extra charge for your safety.
Engine Hoist Load Leveler
$11.95 Read MoreAn engine hoist load leveler works in conjunction with an engine hoist. It is used to level out your load by allowing you to adjust your loads center point. The engine hoist load leveler works great for pulling or installing an engine with the transmission attached. The engine hoist itself is rented separately. The rate on this item is per 24 hours. Getting the job done is much easier when you have the right tool!
Engine Hoist, Knock Down
$23.95 – $29.95 Read MoreThis knock down engine hoist has a 1000 pound capacity and comes with a chain sling. It breaks down to fit into most trucks, SUV’s, or hatchbacks. The knock down engine hoist has a max lifting height of 8′ 3″. Getting the job done is a lot easier when you have the right tool.
Engine Hoist, Towable
$29.95 – $49.95 Read MoreThis towable engine hoist has a 3000 pound capacity and comes with a chain sling. It requires a hitch with a 2″ ball in order to be transported. Getting the job done is a lot easier with the right tool!
Engine Stand
$12.95 – $59.95 Read MoreThis adjustable engine stand allows you to complete engine repairs easily. Getting the job done is a lot easier when you have the right tool!
Impact Wrench, Pneumatic
$15.95 – $24.95 Read MoreThis pneumatic impact wrench has a 1/2″ drive and operates at 380 foot pounds. This tool requires an air compressor which we rent separately if needed. Getting the job done is a lot easier when you have the right tool!
Jack, Floor Jack
$17.95 – $27.95 Read MoreThis floor jack has a 3 ton lift capacity and will lift anywhere from 3.75″ up to 23″. This low profile jack is great for working on all types of vehicles. The handles can be removed for easier transportation. The floor jack weighs 104 pounds. Getting the job done is much easier when you have the right tool!
Jack, Transmission Jack
$17.95 – $27.95 Read MoreThis transmission jack has a 1000 pound capacity. Getting the job done is a lot easier when you have the right tool!
Micrometer
$8.95 – $12.95 Read MoreThis micrometer will measure up to 4″. Getting the job done is a lot easier when you have the right tool!
Pipe Reamer
$8.95 – $12.95 Read MoreA pipe reamer is the tool to use if you need to remove burrs from the inside of pipes. It can also be used for holes drilled in metal.
Puller, Bearing Frame Pusher or Puller
$9.95 – $12.95 Read MoreA bearing frame pusher or puller is effective in removing or installing bearings fitted too close to the housing. This leaves regular jaw pullers no chance to do their job.
Puller, Bushing Puller and Installer
$9.95 – $12.95 Read MoreUse this bushing puller and installer to remove or install bushings without needing a press. Getting the job done is always easier when you have the right tool!
Puller, Cam Bearing Puller and Installer
$16.95 – $24.95 Read MoreThe cam bearing puller and installer aids in the removal or installation of a cam bearing. Getting the job done is always easier with the right tool!
Puller, Gear Puller
$9.95 – $12.95 Read MoreThe adjustable gear puller is used for the removal of gears, bearings, and other pressed on items. Getting the job done is a lot easier when you have the right tool!
Puller, Harmonic Balance Puller
$9.95 – $12.95 Read MoreA harmonic balance puller is a specialized tool that’s used to safely remove harmonic balancers without damaging your vehicle. It also works on things like gear pulleys and steering wheels. Getting the job done is a lot easier when you have the right tool!
Puller, Pilot Bearing Puller
$9.95 – $12.95 Read MoreThe pilot bearing puller is used to remove the pilot bearing. Getting the job done is a lot easier when you have the right tool!
Puller, Pitman Arm Puller
$9.95 – $12.95 Read MoreThe pitman arm puller is used to remove the pitman arm. Getting the job done is a lot easier when you have the right tool!
Puller, Steering Wheel Lock Plate Remover
$9.95 – $14.95 Read MoreThe steering wheel lock plate remover is used to depress the lock plate on a steering wheel. Getting the job done is always easier with the right tool!
Puller, Steering Wheel Puller
$9.95 – $12.95 Read MoreA steering wheel puller is used for removing a steering wheel. Getting the job done is a lot easier with the right tool!
Puller, Wheel Hub Puller
$9.95 – $12.95 Read MoreThe wheel hub puller is used to remove the wheel hub on a vehicle. Getting the job done is a lot easier with the right tool!
Pulley Remover and Installer Kit
$8.95 – $12.95 Read MoreThis pulley remover and installer kit will work on most power steering, alternators, and air emissions. Getting the job done is a lot easier with the right tool!
Safety Stands, Automotive
$9.95 – $12.95 Read MoreSafety stands are essential when working underneath a vehicle. These are rented as a pair only.
Sander, 7″ Disc Sander
$14.95 – $19.95 Read MoreA disc sander is the right tool for automotive or metal sanding. This item requires a standard 110v power supply. Hearing and eye protection are available for no extra charge.
Screw Jacks 10″ x 2″
$12.95 – $77.95 Read MoreThese screw jacks have a 20 ton capacity and are rented only as a pair. These also come in 8″ and 12″. Getting the job done is always easier with the right tool!
Screw Jacks 12″ x 2″
$14.95 – $89.95 Read MoreThese screw jacks have a 20 ton capacity and are rented only as a pair. These also come in 8″ and 10″. Getting the job done is always easier with the right tool!
Screw Jacks 8″ x 2″
$10.95 – $65.95 Read MoreThese screw jacks have a 20 ton capacity and are rented only as a pair. These also come in 10″ and 12″. Getting the job done is always easier with the right tool!
Torque Wrench, Click Type
$13.95 – $18.95 Read MoreThis torque wrench has a 1/2″ drive and ranges from 35-250 foot pounds (43.4-348.4 mm). This wrench will precisely apply a specific torque to a nut or bolt. Getting the job done is a lot easier when you have the right tool!
HOURS OF OPERATION: MON-SAT 7:30am-5pm SUN 9AM-4PM
We DO NOT ship or deliver outside of Colorado! We apologize for any inconvenience!
We also refill most PROPANE tanks! 
Contact Us.
- 6550 South Yosemite Street
Greenwood Village, CO 80111 - Phone 303-770-2980
- Fax: 303.770.3263
- info@asrentall.com
In your cart
- No products in the cart.