Power Tools/Hand Tools

View as grid list

Why buy a tool or piece of equipment you’ll use once a year (or less), have to store, and have to maintain? RENT IT INSTEAD!!!

Details Select options
ADDED

1.5 hp Electric Compressor

This compressor runs at 3.6 cfm at 120 psi on dual tanks and is great for most pneumatic tools and comes with a 50′ air hose. This compressor can also be used to fill balloons quickly as a cheap alternative to helium. We provide the proper filling nozzle for balloons if needed. This item requires a standard 110v power supply.

$19.95 – $110.95 Read More
Details Select options
ADDED

1.5 hp Electric Sprinkler Compressor

This compressor runs at 6.2 cfm at 120 psi on dual tanks and is great for blowing out household sprinkler lines or running most pneumatic tools that require higher cfm and comes with a 50′ air hose.

$40.00 – $70.00 Read More
Details Select options
ADDED

1/2″ Drive Heavy Duty Drill

This drill is great for drilling through tougher materials such as metal or treated lumber such as railroad ties and comes with a key chuck and left or right handed handle. This drill does not come with any drill bits and cannot be used on brick or masonry. This item requires a standard 110v power supply.

$12.95 – $59.95 Read More
Details Select options
ADDED

1/2″ Drive Magnum Drill

This is a standard, heavy duty drill that comes with a key chuck and left or right handed handle. This drill does not come with any drill bits and cannot be used on brick or masonry. This item requires a standard 110v power supply.

$12.95 – $59.95 Read More
Details Select options
ADDED

10″ Table Saw

This item requires a standard 110v power supply.

$29.95 – $159.95 Read More
Details Select options
ADDED

100′ Fish Tape

Fish tape are used to run wires through conduit.

$8.95 – $35.95 Read More
Details Select options
ADDED
12″ Compound Mitre Box
This saw is perfect for mitre cuts on trim or lumber. This item requires a standard 110v power supply.
- Precise miter system and machined base fence support deliver increased cutting accuracy
- 7 hardened steel positive bevel stops at most common angles – 0°, 33.9°, 45° and 48° left and right
- Tall sliding fences support tall materials and easily slide out of the way for bevel cuts
- Powerful 15.0 Amp motor, 3,600 rpm provides extended power and durability
- 44 lb weight and built-in carrying handle for increased portability
- Vertical Capacity: Baseboard Against Fence: 6-1/2″
- Vertical Capacity: Crown Molding Vertically Nested: 6-5/8″
- Horizontal Capacity: 2 x 8
- 90° Cross-Cut Capacity (dimensional lumber): 2 x 8
- 45° Miter Cut Capacity (dimensional lumber): 2 x 6
- 10″ maximum cross cut capacity with exclusive back fence design
$27.95 – $159.95 Read More
Details Select options
ADDED

14″ Cutoff Saw

This chop saw is for cutting through metal or masonry. This item requires a standard 110v power supply.

$29.95 – $159.95 Read More
Details Select options
ADDED

2.75 hp Electric Compressor

This compressor runs at 4.5 cfm at 100 psi on dual tanks, has two quick couplers so that two tools can be used at once, is great for most pneumatic tools, and comes with a 50′ air hose. This compressor can also be used to fill balloons quickly as a cheap alternative to helium. With this compressor you can have 2 people filling 2 balloons at the same time! We provide the proper filling nozzle for balloons if needed. This item requires a standard 110v power supply.

$21.95 – $120.95 Read More
Details Select options
ADDED

24″ Bolt Cutter

For cutting standard padlocks, chains, bolts, and more.

$8.95 – $12.95 Read More
Details Select options
ADDED

3″ x 24″ Belt Sander

We carry sander belts for this sander in 50 grit, 80 grit, or 120 grit which are sold separately. This item requires a standard 110v power supply.

$15.95 – $75.95 Read More
Details Select options
ADDED

36″ Bolt Cutter

For cutting larger padlocks, chains, bolts, and more.

$9.95 – $13.95 Read More
Details Select options
ADDED

4″ Disc Grinder

This tool can be used for grinding or cutting various metals with the appropriate discs. This tool does not include any discs.

$13.95 – $54.95 Read More
Details Select options
ADDED

5 hp Gas Compressor

This compressor runs at 6.2 cfm at 120 psi on dual tanks and is great for blowing out household sprinkler lines or running most pneumatic tools that require higher cfm and comes with a 50′ air hose. All of our gas driven equipment comes to you full of gas, does not need to be refilled before return, and has an additional fuel surcharge added to the bill of $3.50.

$40.00 – $70.00 Read More
Details Select options
ADDED

60 Pound Electric Breaker Hammer

This hammer is meant for breaking up concrete or stone flooring. This hammer comes with the hammer, a chisel point, a pencil point, a 12 gauge 50′ extension cord, and a cart. Your job site must be within 50′ of a standard 110v power supply. This item requires a standard 110v power supply. The end-user of this product must come in to our location to receive proper training and safety procedures for this item.

$39.90 – $75.95 Read More
Details Select options
ADDED

7.25″ Circular Saw

This saw comes with a blade and additional blades are available and are sold separately. This item requires a standard 110v power supply.

$12.95 – $59.95 Read More
Details Select options
ADDED

7″ Disc Sander

This is a 4000 rpm sander typically used for automotive/metal sanding. Sanding discs are sold separately. This item requires a standard 110v power supply.

$14.95 – $19.95 Read More
Details Select options
ADDED

Conduit Bender

We carry these for 1/2″ or 3/4″ conduit, rented separately.

$7.95 – $35.95 Read More
Details Select options
ADDED

Electric Demolition Hammer

This hammer is meant for breaking up concrete, brick, or stone floors or walls. This hammer comes with the hammer, a chisel point, and a pencil point. This item requires a standard 110v power supply. The end-user of this product must come in to our location to receive proper training and safety procedures for this item.

$29.95 – $149.95 Read More
Details Select options
ADDED

Extension Cord, 100′ 10 Guage

12/3 wire, grounded extension cord.

$9.95 – $29.95 Read More
Details Select options
ADDED

Extension Cord, 50′ 12 Guage

12/3 wire, grounded extension cord.

$6.95 – $18.95 Read More
Details Select options
ADDED

Heat Gun

Heat guns are great for removing paint, removing glued on surfaces, shrink wrap, and more. This item requires a standard 110v power supply.

$10.95 – $39.95 Read More
Details Select options
ADDED

Jigsaw

A jigsaw is used for cutting out more intricate designs. Blades for this saw are sold separately. This item requires a standard 110v power supply.

$12.95 – $59.95 Read More
Details Select options
ADDED

Large Rotary Hammer

Rotary hammers are use to drill holes in concrete or brick. We carry 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1 1/8″, 1 1/4″, and 1 1/2″ bits for this rotary hammer. We also carry a small rotary hammer for smaller holes which is rented separately. This item requires a standard 110v power supply.

$29.90 – $59.95 Read More
Details Select options
ADDED
Lock/Deadbolt Installation Kit
This kit is for installing standard 2 1/8″ locks or deadbolts.

Includes:
- One (1) – 2-1/8″ carbon hole saw
- One (1) – 1″ spade bit
- One (1) – mandrel
- One (1) – 3/32″ allen wrench
- One (1) – 1″ wood chisel
- One (1) – 5/32″ pilot drill
- Centering template
$5.95 – $23.95 Read More
Details Select options
ADDED

Metal Detector

This metal detector is great for finding lost jewelry or keys lost accidentally, is light weight and very user friendly, and has 3 separate search modes: all metals, jewelry (precious metals), and coins.

$14.95 – $24.95 Read More
Details Select options
ADDED

Orbital 1/3 Sheet Palm Sander

We carry sandpaper in 50 grit, 80 grit, and 120 grit which are sold separately. This item requires a standard 110v power supply.

$12.95 – $54.95 Read More
Details Select options
ADDED

Orbital 1/4 Sheet Palm Sander

We carry sandpaper in 50 grit, 80 grit, and 120 grit which are sold separately. This item requires a standard 110v power supply.

$9.95 – $45.95 Read More
Details Select options
ADDED

Pneumatic Finish Nailer

This is a Portercable FN250A finish nailer which shoots finish nails from 1″ up to 2.5″ in length. This nailer is great for trim or finish work and requires a compressor which we carry if needed, but is rented separately.

$19.95 – $89.95 Read More
Details Select options
ADDED

Pneumatic Framing Nailer

This is a Porter Cable FR350 framing nailer which shoots Porter Cable nails from 2″ up to 3.5″ in length. This nailer is requires a compressor which we carry if needed, but is rented separately.

$25.95 – $105.95 Read More
Details Select options
ADDED

Router

This router runs at 2500 rpm and we do not carry bits at all. This item requires a standard 110v power supply

$18.95 – $74.95 Read More
Details Select options
ADDED

Sawzall/Reciprocating Saw

This is a heavy duty reciprocating saw for cutting through a wide variety of materials such as wood, metal, plastics, and more. Blades for this saw are sold separately. This item requires a standard 110v power supply.

$19.95 – $59.95 Read More
Details Select options
ADDED

Sledge Hammer
$6.95 – $20.95 Read More
Details Select options
ADDED

Small Rotary Hammer

Rotary hammers are use to drill holes in concrete or brick. We carry 3/16″, 3/8″, 1/2″, and 5/8″ bits for this rotary hammer. We also carry a large rotary hammer for larger holes which is rented separately. This item requires a standard 110v power supply.

$19.90 – $45.95 Read More
Details Select options
ADDED

Stud Gun

This gun is used for driving nails into concrete and uses a 22 caliber shell. We carry various nails and shells which are sold separately. The user of this item must come in to receive full use and safety instructions.

$19.95 – $89.95 Read More
Details Select options
ADDED

Wallpaper Steamer

The easiest way to remove that ugly, old wallpaper and give your home a fresh new look. We also carry narrow pans and perforators which are rented separately. This item requires a standard 110v power supply.

$25.95 – $105.95 Read More
Details Select options
ADDED

Wallpaper Steamer Narrow Pan

This pan is used to get into tighter spaces when using our wallpaper steamer and is rented separately from the steamer.

$3.95 – $11.95 Read More
Details Select options
ADDED

Wallpaper Steamer Perforator

This item is used to put holes in non porous wallpaper to allow moisture to penetrate the paper in preparation to steam it off. This item is rented separately from the steamer itself.

$3.00 – $9.00 Read More

Cart

Power Tools/Hand Tools

1.5 hp Electric Compressor

1.5 hp Electric Sprinkler Compressor

1/2″ Drive Heavy Duty Drill

1/2″ Drive Magnum Drill

10″ Table Saw

100′ Fish Tape

12″ Compound Mitre Box

14″ Cutoff Saw

2.75 hp Electric Compressor

24″ Bolt Cutter

3″ x 24″ Belt Sander

36″ Bolt Cutter

4″ Disc Grinder

5 hp Gas Compressor

60 Pound Electric Breaker Hammer

7.25″ Circular Saw

7″ Disc Sander

Conduit Bender

Electric Demolition Hammer

Extension Cord, 100′ 10 Guage

Extension Cord, 50′ 12 Guage

Heat Gun

Jigsaw

Large Rotary Hammer

Lock/Deadbolt Installation Kit

Metal Detector

Orbital 1/3 Sheet Palm Sander

Orbital 1/4 Sheet Palm Sander

Pneumatic Finish Nailer

Pneumatic Framing Nailer

Router

Sawzall/Reciprocating Saw

Sledge Hammer

Small Rotary Hammer

Stud Gun

Wallpaper Steamer

Wallpaper Steamer Narrow Pan

Wallpaper Steamer Perforator

We DO NOT ship or deliver outside of Colorado! We apologize for any inconvenience!

We also refill most PROPANE tanks!

Contact Us.

STORE HOURS

MAY 1st-DECEMBER 31st

Monday-Saturday: 7:30am-5:00pm

Sunday: 9:00am-4:00pm

In your cart

STORE HOURS

MAY 1st-DECEMBER 31st

Monday-Saturday: 7:30 am - 5:00 pm

Sunday: 9:00am-4:00pm

Contact Us.

Proudly Serving Colorado since 1979!

Our Location